The AI108-4958-SU includes:

• 1 Unit AI108-4958-N indoor bridge (w/N-type female connector)
• 1 Unit 25 ft. LMR-400 RF cable (w/N-type male connectors)
• 1 Unit AI108-2-23 outdoor antenna (23 dBi panel antenna w/N-type female connector and mounting bracket)
  

Features include:

• Will communicate with up to 2 other WirelessGRID bridges.
• Distance tested: Up to 2.5 miles in multipoint mode. (Depends on antenna used.
• Simple to use web configuration and management utility
• Antenna Alignment: Real-time RSSi (Signal to Noise) Signal Monitor for Antenna Alignment and Link Quality
• Real-time statistics: Monitor Bridge Status, Data Rate, Packet Error Rate (PER), RSSi (stats and graphing), and more...
• SecureRF Security: Proprietary WirelessGRID Protocol, WirelessGRID & ACL MAC address link authentication. AES data encryption
• Channel Size: 40 or 20 MHz wide
• Non-overlapping Channels: 5.25-5.35 GHz (FCC, IC, Mexico, Poland) 4 x 20 MHz, 2 x 40 MHz
• Non-overlapping Channels: 5.47-5.72 GHz (ETSI, FCC, ITU) with TPC and DFS. 11 x 20 MHz
• Non-overlapping Channels: 5.725-5.850 GHz (UNII & ISM Bands-ETSI, FCC, MII, RA, Mexico) 5 x 20 MHz, 2 x 40 MHz
• Modes: 108, 96, 72, 54, 48, 36, 24, 18, 12, 9, 6 Mbps or Auto
• Radio Transmit Output Power: 0 and 21 dBm. Supports Transmit Power Control and Dynamic Frequency Selection where required
• Receive Sensitivity: between -71 to -85 dBm depending on mode of operation
• Modulation: 64QAM, 16QAM, QPSK, and BPSK modulation
• VPN Support: for Ethernet tagged frames (802.1q, 802.1p, and VPN)
• AC Power Supply (100-120 AC, 50-60Hz input. 5 Volt, 2 Amp output, Bridge Connector: 2.1mm Coax - Center pin positive)
• LED diagnostics: For power, network link/activity, radio link/activity monitoring